Skateboard wall storage and display rack

Display and store your skateboard collection with a custom built GearHooks® SKR2/4/6/8 skateboard rack. Whether you've got shortboards, longboards, cruisers, old school boards or a mixture of boards, they will all look great on the rack.

You can choose a skateboard rack with just a couple of GearHooks®, add to it later or get one fully loaded that will take 8 boards. If you don't fill the rack straight away you can store helmets, clothing, pads and even skis, poles and helmets on the same hooks.

Each Skateboard rack includes a 1M long rail, in your choice of colour and 2, 4, 6 or 8 GearHooks®. Each GearHook is a 200mm long double prong design with soft rubber coating, specially designed to hold skateboards under the front truck.

Each one will accommodate decks up to 8.5" or more, any length board, any wheelbase and any nose/tail design. The 25mm gap caters for almost any flat or concave deck design including radial, concave, convex, w, progressive, tub and asymmetric.  

The SKR2 has 2 x 200mm long GearHooks® for 2 skateboards or mix of gear

The SKR4 has 4 x 200mm long GearHooks® for 4 skateboards or mix of gear

The SKR6 has 6 x 200mm long GearHooks® for 6 skateboards or mix of gear

The SKR8 has 8 x 200mm long GearHooks® for 8 skateboards or mix of gear

For more information about GearHooks® take a look at our FAQs at the bottom of this page.

All prices are reduced by at least 20% during the launch period.

Save money. Order Today!

Make Space - Save Time - Do more!

Please note that photographs are for illustration only and may not show your exact product choice.

Specifications

The  GearHooks® SKR2/4/6/8 skateboard rack.  includes;

• 1 x 1M long cold rolled steel rail galvanised and powder coated with over 20 fixing slots
• Your choice of 8 different colours (red, orange, yellow, blue, green, black, white & grey)
• 2 x black plastic end caps
• 3 x hex head wall bolts (Allen Key) for wood or plasterboard battens
• 3 x expanding nylon fixings for brick, block, stone or concrete
• 2/4/6/8 x cold formed steel hooks with bright zinc plating to prevent corrosion
• 6/8/12/16 x soft rubber sleeves to hold and protect your skateboards
• 2/4/6/8 x CNC machined clamps in black engineering polymer that is stronger than aluminium
• 2/4/6/8 x M8 sliding nuts to position and adjust the hooks anywhere on the rail
• 2/4/6/8 M8 hex head bolts (Allen Key) to attach the hooks to the sliding nuts
• Full fitting and use instructions
• No quibble Lifetime guarantee

For more information about GearHooks® take a look at our FAQs at the bottom of this page.

All prices are reduced by at least 20% during the launch period.

Save money. Order Today!

Make Space - Save Time - Do more!

Please note that photographs are for illustration only and may not show your exact product choice