Ski wall rack and snowboard wall storage for up to 12 pairs of skis or 6 snowboards
The GearHooks® SBR4/8/12 Ski and Board Rack, with double pair hooks, is the wall mounting ski storage solution to hang up to 12 pairs of skis, and/or 6 snowboards in the minimum space at home, in the garage or in a ski lodge.
The Ski Club of Great Britain recently tested and reviewed the full range. This is what they said:
"Gearhooks will come as a boon to anyone looking for a simple, stylish and convenient way to rack their kit."
"Given the price of a Gearhooks system it’s a great investment for any skier or boarder with a quiver."
They concluded that the GearHooks ski and board racks were:
"A simple, easy-to-use storage solution for skis and boards at a great price"
You can read the full review here:
It is a combination of ski rack, snowboard rack and ski equipment organiser. It will safely store all your expensive gear in just 1M of wall space, off the floor and out of the way where its clean and dry.
The racks come with 2, 4 or 6 x 300mm long GearHooks. Each one takes 2 pairs of skis* or 1 snowboard so you can store up to 12 pairs of skis, 6 snowboards or any combination of skis and boards.
The SBR4 has 2 x 300mm long GearHooks® for 4 pairs of skis
The SBR8 has 4 x 300mm long GearHooks® for 8 pairs of skis
The SBR12 has 6 x 300mm long GearHooks® for 12 pairs of skis
Each GearHook can be fitted anywhere on the rail and be moved up or down to stagger the bindings. This allows the most pairs of skis or boards to be stored in the minimum amount of wall space.
You can order a rail with just the right number of hooks (you can always order more later) or order one with more hooks and use any spare ones to store clothing, transceiver, probes, shovel, backpacks, helmets and much more.
Each ski rack comprises a 1M long steel rail which is galvanised and powder coated in your choice of colour. Each 300mm long GearHook has a 25mm gap and is made from cold formed, zinc plated, mild steel with a soft rubber coating. GearHooks are fitted to the rail with a CNC machined clamp, M8 hex head (Allen key) bolt and sliding nut. The end result is as strong as a custom welded rack but you can add or move hooks whenever you want.There are other hooks (available separately) for more skis, snowboards, boots, clothing, helmets, backpacks, transceivers, shovels and probes.
Different ski type limitations
Mounting 12 pairs of adult Piste skis or a mix of adult and child skis on a rack creates very different loads and stresses compared to 12 pairs of All Mountain, Powder or Fat skis.
We do not recommend putting 2 pairs of heavy skis (like All Mountain, Powder or Fat skis over 7KG) on one hook as this may cause the rail to flex.
One pair of Heavy skis should be mounted closest to the wall. These may also spread the prongs of the hook and, if they, or the next pair of skis, have a small tip rocker, they may slip through the prongs. We supply a velcro strap to prevent this happening. This should be fitted after the first pair of skis.
If you have more than 6 pairs of heavy skis and bindings, you may need extra wall fixings. In some cases, with all heavy skis, you may be limited to one pair of skis per hook.
We also produce a rack for up to 6 pairs of skis which may be a better option for over 6 pairs of skis that are over 7kg.
Each GearHook is made from 8mm thick cold formed, zinc plated, mild steel with a soft rubber coating. GearHooks are fitted to the rail with a CNC machined clamp, M8 hex head (Allen key) bolt and sliding nut. The end result is as strong as a custom welded rack but you can add or move hooks whenever you want.
The GearHooks® SBR4/6/12 ski and snowboard rack includes;
- 1 x 1M long cold rolled steel rail galvanised and powder coated with over 20 fixing slots
- Your choice of 8 different colours (red, orange, yellow, blue, green, black, white & grey)
- 2 x black plastic end caps
- 3 x hex head wall bolts (Allen Key) for wood or plasterboard battens
- 3 x expanding nylon fixings for brick, block, stone or concrete
- 2/4/6 x cold formed steel GearHooks (300mm long) with bright zinc plating to prevent corrosion
- 4/8/12 x soft rubber sleeves to hold and protect your skis
- 2/4/6 x CNC machined clamps in black engineering polymer that is stronger than aluminium
- 2/4/6 x M8 sliding nuts to position and adjust the hooks anywhere on the rail
- 2/4/6 M8 hex head bolts (Allen Key) to attach the hooks to the sliding nuts and rail
- Full fitting and use instructions
- No quibble Lifetime guarantee
Other Ski and Snowboard storage solutions
If this product isn’t quite right for you, take a look at some of our other clever ski and snowboard storage products. Just click on the text links below:
Please note : If you plan to store skis and snowboards on the same rail : snowboards resting on their bindings will stick up above the ski tips by about 0.5M. An alternative to this is to store two snowboards back-to-back and hang them by their tips.
For More information about GearHooks take a look at our FAQs.
All prices are reduced by at least 20% during the launch period.
Save money. Order Today!
Make Space - Save Time - Do more!
Please note that photographs are for illustration only and may not show your product choice
Share this Product
Hi , we are taking the hooks to France to our flat so will let you know when installed and in use - but they look great and and are Welsh !! BW Katherine Davies
Love the product, easy to fit and very flexible use. I have it set up for skis and bikes and works really well
Does exactly what is says on the tin! very carefully packaged prompt delivery excellent product
I was doing a garage renovation and was looking for some nice gear hooks that would fit on my cross beams, just below the ceiling. Most of what I could find online just looked cheap and flimsy and their shape limited what I could store on them. The Gear Hooks and Rails are really solid and strong, and the shape has great carrying capacity. The hooks with long protective sleeves look very neat.
A wonderful product and excellent customer service!
I was a bit skeptical as to whether the 300mm hook would hold the skis and boards up without sagging. Need not have worried. Very easy to fix onto the wall and ver very sturdy. Industrial use here with snowboards, ski’s and longboards including helmets, poles boots etc piled on. I inverted the hook to store my longboards. Definitely dip the bolts into oil or wd40 as per instruction, as my neighbour who bought this before ended up stripping the bolt head. He had the replacement sent straight away though. All in all a very compact and sturdy solution to store a lot of snow gear. Very happy.
It's clear I’m an idiot, as I didn’t ready the comprehensive descriptions well enough and ordered the wrong hooks for my ski rack. Thankfully Luis understood my mistake and dispatched new hooks at the same time as I sent the ones I’d ordered back. He kept in touch with me throughout too. If only more retailers were like Gear Hooks - we'd have a much better experience when shopping. I thoroughly recommend both the product and the company. I think many of the owners in Pre d'Anne Chloe, Samoens will be doing the same thing soon!
These are neat, unfussy, robust and competitively priced.
Prompt service and exactly what I had hope for - have yet to install them but so far very happy with my choice compared to other options I researched before deciding on GearHooks.
I am really impressed with this ski rack. It is solid, well designed, simple to fit and obviously easy to use. The fitting instructions are well thought through and clear - much more than just a few line drawings. There is a level of care and thought that has been put into every element of this product, which I really appreciate. Would definitely recommend.